To provide delegates with an understanding of current relevant legislation and be able to assemble, use and dismantle low level access units (prefabricated units under 2.5m of height) safely, as per the manufacturer's instructions.
Completing the e-learning alone does not qualify you as a tower user; industry standards require both the knowledge gained in the e-learning theory session and assessed assembly and use of the equipment to demonstrate proficiency. Once you have completed the e-learning, you must also complete the practical assessment and testing at a PASMA approved HSS Training centre. On successful achievement, of all three parts, we will apply for your PASMA Certification and ID Card.
Please note: The e-learning module must be completed within 6 months of the date of booking
To take advantage of this, please follow the below steps:
- Get in touch with us on 0345 605 0006 or click below to book - at this time you will be charged the full course cost
- Complete the theory e-learning module which can be done anytime, anywhere and on any device, at a pace which suits you (compatible with PCs, Macs, tablets and smartphones on any modern internet browser)
- Once you have completed and successfully passed the e-learning, please contact us to book your practical training and assessment at one of our PASMA approved centres - you will be asked to provide evidence of successful completion of the e-learning certificate which is created / printed at the end of your e-learning
- Delegates are required to attend an HSS Training PASMA approved training centre within 90 days of completing the e-learning module to sit their theory exam and undertake practical training and assessment [this has been temporarily increased due to Covid-19]
- You will need to bring a copy of your ‘certificate of completion’ to the course for the trainer to verify, without this you will be refused entry
- Upon entry to the course, you will be asked to complete an open book multiple choice questionnaire which is based on the knowledge gained from the e-learning. This will be followed by a practical training and assessment session, with the duration dependent upon knowledge and experience
To find the next available date at a centre near you, please contact us on 0345 605 0006 or email training@hss.com.
This course is also available as a half-day tutor led PASMA Low Level Access course, please click here.
The e-learning module is a series of videos covering the same content as the normal classroom based Low Level Access course.
- PASMA Training Scheme
- Regulations / Standards
- Equipment / Selection / Use
- Assembly methods
- Hazards
- Assessment
- AM courses start at 08:30
- PM courses start at 13:00
Those who work from prefabricated units under 2.5m of height.
This e-learning module is ideal for those individuals who do not want time away from their job / workplace.
- This course is also available as a half-day tutor led PASMA Low Level Access course, please click here.
Since the assembly and use of mobile towers can be physically demanding, users should be physically fit, in good health and should, generally, not have problems with eyesight or hearing, heart disease, high blood pressure, epilepsy, fear of heights / vertigo, giddiness / difficulty with balance, impaired limb function, alcohol or drug dependence or psychiatric illness.
As a company that is committed to providing high quality services to all our clients, we will always aim to make reasonable adjustments ensuring all individuals receive the required help they need. Click here to learn more
Having completed the e-learning theory module, delegates will be issued with a 'certificate of completion'. Delegates will then need to contact HSS Training to sit their theory exam and undertake practical training and assessment in one of our training centres within 90 days of completing the e-learning module. The follow up event is a half day face to face session with practical training and assessment.
To find the next available date at a centre near you, please contact us on 0345 605 0006 or email training@hss.com.
All delegates will still be expected to complete a theory test when they arrive at a training centre to verify that they have the knowledge to continue to the practical element of the course. Delegates will be required to bring their e-learning 'certificate of completion' with them on the day.
Delegates successfully completing the course will receive a Digital PASMA Certification and ID Card (valid for 5 years).
If you would like to purchase a Printed Add-On of your card and certificate this can be purchased here.
PASMA - Low Level Access for Users (E-Learning) Course FAQs.
About PASMA
Q1. What is PASMA training?
Mobile Access towers are portable, prefabricated structures used to safely work at height. PASMA (Prefabricated Access Suppliers' and Manufacturers Association) provides nationally accredited training for mobile access towers. PASMA training aims to help delegates understand safe assembly, use and inspection of these towers, supporting compliance with industry health and safety requirements.
_________________________________________________________________________________
Q2. What is the PASMA Low Level Access for Users course?
The half-day course aims to teach delegates how to safely assemble, use, move, inspect, and dismantle low-level access equipment such as podium steps and folding room scaffolds. Designed for work at heights below 2.5 metres, it combines theory and practical training to promote safe practices when using low-level work platforms.
_________________________________________________________________________________
Q3. What is the PASMA e-learning module?
The e-learning theory module covers the theory component of the PASMA Low Level Access for Users course, including key safety principles, legislation, risk management and best practices. You must complete it before attending the practical session.
_________________________________________________________________________________
Q4. Is PASMA a legal requirement?
Under the Work at Height Regulations, employers have a legal responsibility to ensure delegates who assemble or use low level access equipment are properly trained and compliant. PASMA certification is widely recognised as the industry standard for demonstrating this compliance and is often a mandatory requirement on construction sites.
_________________________________________________________________________________
Q5. Is PASMA training valid internationally?
PASMA certification is UK-based and widely recognised across Europe. However, some countries may require additional country-specific training. Please refer to the PASMA website for additional guidance.
_________________________________________________________________________________
Who Should Attend
Q6. Who is this course for?
This course is ideal for delegates working in construction, maintenance, retail, facilities management or similar sectors where low-level work in controlled indoor environments is common. It’s suitable for beginners, those who need certification for site access or anyone renewing an expired qualification.
_________________________________________________________________________________
Q7. Do I need prior experience?
No previous experience is required; however, a basic awareness of work at height is beneficial.
_________________________________________________________________________________
How the Training Works
Q8. How long is the e-learning module and when should I complete it?
The e-learning theory module takes approximately 1 hour to complete. It’s self-paced, so you can pause and resume at your own pace, however it must be successfully completed within 6 months of booking.
_________________________________________________________________________________
Q9. What device do I need to access the e-learning theory module?
It works on PCs, Macs, tablets and smartphones using modern browsers. You’ll receive login instructions once your booking is confirmed. You can also refer to the video at the bottom of this page for details on how to access the e-learning module.
_________________________________________________________________________________
Q10. Do I need to attend in-person after completing the e-learning theory module?
Yes. After successfully completing the e-learning module, you must attend a half-day practical session at a PASMA-approved HSS Training Centre. This includes a hands-on practical assessment and a short theory assessment based on the knowledge gained from the e-learning module.
You’ll need to achieve an 80% pass mark before moving onto the practical session.
_________________________________________________________________________________
Assessments & Certification
Q11. How long is my PASMA certificate valid for?
Your digital PASMA Photocard and certificate are valid for 5 years. After that, you’ll need to complete a refresher or relevant PASMA course to keep your training up to date.
_________________________________________________________________________________
Q12. When and how will I receive my results and certificate?
Delegates who successfully complete the e-learning module, theory and practical assessment will receive a digital PASMA PhotoCard and certificate within 28 working days. If you would like to receive a physical printed PASMA Photocard and certificate, they can be purchased here.
_________________________________________________________________________________
Q13. What do the Level and Category codes on my PASMA card mean?
Each PASMA card has two codes:
Level code - refers to your role
🔹U = User
🔹I = Instructor
🔹M = Manager
🔹R/S = Professional Tower Rigger / Access Tower Specialist
Category code - refers to the types of towers you’re trained to use
🔹T = Towers for Users
🔹L = Low Level Access
🔹W = Work at Height (Novice)
🔹A5 = Towers on Stairways
🔹A6 = Towers with Cantilevers
🔹A7 = Towers with Bridges
🔹A8 = Linked Towers
🔹A9 = Large Deck Towers
_________________________________________________________________________________
Delegate Support & Accessibility
Q14. What support is available if I have additional needs or require adjustments?
At HSS Training, we are committed to providing an inclusive and supportive learning environment. If you feel you’d benefit from additional support, whether you’re neurodivergent, have a disability, a specific learning need or if English isn’t your first language, please refer to our Reasonable Adjustments Guide for more information.
_________________________________________________________________________________
Still Have Questions?
If you need further support please contact us on 0345 605 0006, use our live chat or email training@hss.com.
_________________________________________________________________________________
To provide delegates with an understanding of current relevant legislation and be able to assemble, use and dismantle low level access units (prefabricated units under 2.5m of height) safely, as per the manufacturer's instructions.
Completing the e-learning alone does not qualify you as a tower user; industry standards require both the knowledge gained in the e-learning theory session and assessed assembly and use of the equipment to demonstrate proficiency. Once you have completed the e-learning, you must also complete the practical assessment and testing at a PASMA approved HSS Training centre. On successful achievement, of all three parts, we will apply for your PASMA Certification and ID Card.
Please note: The e-learning module must be completed within 6 months of the date of booking
To take advantage of this, please follow the below steps:
- Get in touch with us on 0345 605 0006 or click below to book - at this time you will be charged the full course cost
- Complete the theory e-learning module which can be done anytime, anywhere and on any device, at a pace which suits you (compatible with PCs, Macs, tablets and smartphones on any modern internet browser)
- Once you have completed and successfully passed the e-learning, please contact us to book your practical training and assessment at one of our PASMA approved centres - you will be asked to provide evidence of successful completion of the e-learning certificate which is created / printed at the end of your e-learning
- Delegates are required to attend an HSS Training PASMA approved training centre within 90 days of completing the e-learning module to sit their theory exam and undertake practical training and assessment [this has been temporarily increased due to Covid-19]
- You will need to bring a copy of your ‘certificate of completion’ to the course for the trainer to verify, without this you will be refused entry
- Upon entry to the course, you will be asked to complete an open book multiple choice questionnaire which is based on the knowledge gained from the e-learning. This will be followed by a practical training and assessment session, with the duration dependent upon knowledge and experience
To find the next available date at a centre near you, please contact us on 0345 605 0006 or email training@hss.com.
This course is also available as a half-day tutor led PASMA Low Level Access course, please click here.
The e-learning module is a series of videos covering the same content as the normal classroom based Low Level Access course.
- PASMA Training Scheme
- Regulations / Standards
- Equipment / Selection / Use
- Assembly methods
- Hazards
- Assessment
- AM courses start at 08:30
- PM courses start at 13:00
PASMA - Low Level Access for Users (E-Learning) Course FAQs.
About PASMA
Q1. What is PASMA training?
Mobile Access towers are portable, prefabricated structures used to safely work at height. PASMA (Prefabricated Access Suppliers' and Manufacturers Association) provides nationally accredited training for mobile access towers. PASMA training aims to help delegates understand safe assembly, use and inspection of these towers, supporting compliance with industry health and safety requirements.
_________________________________________________________________________________
Q2. What is the PASMA Low Level Access for Users course?
The half-day course aims to teach delegates how to safely assemble, use, move, inspect, and dismantle low-level access equipment such as podium steps and folding room scaffolds. Designed for work at heights below 2.5 metres, it combines theory and practical training to promote safe practices when using low-level work platforms.
_________________________________________________________________________________
Q3. What is the PASMA e-learning module?
The e-learning theory module covers the theory component of the PASMA Low Level Access for Users course, including key safety principles, legislation, risk management and best practices. You must complete it before attending the practical session.
_________________________________________________________________________________
Q4. Is PASMA a legal requirement?
Under the Work at Height Regulations, employers have a legal responsibility to ensure delegates who assemble or use low level access equipment are properly trained and compliant. PASMA certification is widely recognised as the industry standard for demonstrating this compliance and is often a mandatory requirement on construction sites.
_________________________________________________________________________________
Q5. Is PASMA training valid internationally?
PASMA certification is UK-based and widely recognised across Europe. However, some countries may require additional country-specific training. Please refer to the PASMA website for additional guidance.
_________________________________________________________________________________
Who Should Attend
Q6. Who is this course for?
This course is ideal for delegates working in construction, maintenance, retail, facilities management or similar sectors where low-level work in controlled indoor environments is common. It’s suitable for beginners, those who need certification for site access or anyone renewing an expired qualification.
_________________________________________________________________________________
Q7. Do I need prior experience?
No previous experience is required; however, a basic awareness of work at height is beneficial.
_________________________________________________________________________________
How the Training Works
Q8. How long is the e-learning module and when should I complete it?
The e-learning theory module takes approximately 1 hour to complete. It’s self-paced, so you can pause and resume at your own pace, however it must be successfully completed within 6 months of booking.
_________________________________________________________________________________
Q9. What device do I need to access the e-learning theory module?
It works on PCs, Macs, tablets and smartphones using modern browsers. You’ll receive login instructions once your booking is confirmed. You can also refer to the video at the bottom of this page for details on how to access the e-learning module.
_________________________________________________________________________________
Q10. Do I need to attend in-person after completing the e-learning theory module?
Yes. After successfully completing the e-learning module, you must attend a half-day practical session at a PASMA-approved HSS Training Centre. This includes a hands-on practical assessment and a short theory assessment based on the knowledge gained from the e-learning module.
You’ll need to achieve an 80% pass mark before moving onto the practical session.
_________________________________________________________________________________
Assessments & Certification
Q11. How long is my PASMA certificate valid for?
Your digital PASMA Photocard and certificate are valid for 5 years. After that, you’ll need to complete a refresher or relevant PASMA course to keep your training up to date.
_________________________________________________________________________________
Q12. When and how will I receive my results and certificate?
Delegates who successfully complete the e-learning module, theory and practical assessment will receive a digital PASMA PhotoCard and certificate within 28 working days. If you would like to receive a physical printed PASMA Photocard and certificate, they can be purchased here.
_________________________________________________________________________________
Q13. What do the Level and Category codes on my PASMA card mean?
Each PASMA card has two codes:
Level code - refers to your role
🔹U = User
🔹I = Instructor
🔹M = Manager
🔹R/S = Professional Tower Rigger / Access Tower Specialist
Category code - refers to the types of towers you’re trained to use
🔹T = Towers for Users
🔹L = Low Level Access
🔹W = Work at Height (Novice)
🔹A5 = Towers on Stairways
🔹A6 = Towers with Cantilevers
🔹A7 = Towers with Bridges
🔹A8 = Linked Towers
🔹A9 = Large Deck Towers
_________________________________________________________________________________
Delegate Support & Accessibility
Q14. What support is available if I have additional needs or require adjustments?
At HSS Training, we are committed to providing an inclusive and supportive learning environment. If you feel you’d benefit from additional support, whether you’re neurodivergent, have a disability, a specific learning need or if English isn’t your first language, please refer to our Reasonable Adjustments Guide for more information.
_________________________________________________________________________________
Still Have Questions?
If you need further support please contact us on 0345 605 0006, use our live chat or email training@hss.com.
_________________________________________________________________________________
Those who work from prefabricated units under 2.5m of height.
This e-learning module is ideal for those individuals who do not want time away from their job / workplace.
- This course is also available as a half-day tutor led PASMA Low Level Access course, please click here.
Since the assembly and use of mobile towers can be physically demanding, users should be physically fit, in good health and should, generally, not have problems with eyesight or hearing, heart disease, high blood pressure, epilepsy, fear of heights / vertigo, giddiness / difficulty with balance, impaired limb function, alcohol or drug dependence or psychiatric illness.
As a company that is committed to providing high quality services to all our clients, we will always aim to make reasonable adjustments ensuring all individuals receive the required help they need. Click here to learn more
Having completed the e-learning theory module, delegates will be issued with a 'certificate of completion'. Delegates will then need to contact HSS Training to sit their theory exam and undertake practical training and assessment in one of our training centres within 90 days of completing the e-learning module. The follow up event is a half day face to face session with practical training and assessment.
To find the next available date at a centre near you, please contact us on 0345 605 0006 or email training@hss.com.
All delegates will still be expected to complete a theory test when they arrive at a training centre to verify that they have the knowledge to continue to the practical element of the course. Delegates will be required to bring their e-learning 'certificate of completion' with them on the day.
Delegates successfully completing the course will receive a Digital PASMA Certification and ID Card (valid for 5 years).
If you would like to purchase a Printed Add-On of your card and certificate this can be purchased here.